Overview
IES7211-10GE4GF-DC, 14 Ports Gigabit Managed Industrial Switch,Provide 4 Gigabit SFP Uplink,DIN-Rail Mount, With Redundant Power Input
-
Physical Port
10 gigabit ethernet RJ45 ports for high-speed connectivity.4 mini-GBIC/SFP slots for flexible fiber connections.1 RJ45 console port for easy management access.1 reset button for quick factory reset and reboot.SwitchingBackplane bandwidth 32Gbps,Packet forwarding rate 20.84Mpps,MAC address 8kHardware-based 10/100/1000Mbps (half/full duplex) auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operationHardwareIndustrial Case and InstallationIP40 High- strength Aluminum caseDIN-rail mount design12~54V DC, redundant power with reverse polarity protectionSupports 8KV DC Ethernet ESD protection-40 to 85 degrees C operating temperatureLED indicators for Power, LINK/ACT -
Lightning Protection
IEC61000-4-3 (RS):10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022):Class BIEC61000-6-2:Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :1000A/mIEC61000-4-10 (Damped oscillation) :30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :CM 2.5kV, DM 1kVIEC61000-4-4(EFT):Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :30V, 300V, 1sIEC61000-4-2 (ESD):±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :10V(150kHz~80MHz)IEC61000-4-8 (Power frequency magnetic field) :100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge) Power cable:CM±4kV/ DM±2kV, Data cable: ±4kVMechanical PropertiesIEC60068-2-6:Anti VibrationIEC60068-2-32:Free FallIEC60068-2-27:Anti ShockSecuritySupport IEEE 802.1xSupport RADIUS accountingSupport Access Control Lists (ACLs)Support MAC SecuritySupport IP Source Guard prevents IP spoofing attacksSupport DoS Attack PreventionSupport aaa authentication -
Layer 2 Features
Support IEEE 802.1Q VLANSupport MAC VLANSupport Surveillance VLANSupport Voice VLANSupports Spanning Tree ProtocolSupports Link Aggregation (LACP)Supports port mirrorSupports Multicast Filtering (IGMP)Supports DHCPSupports ERPSSupports RMONSupports MLD snoopingSupports MVRSupports Quality of Service (Qos)Supports Port Error DisableSupports Rate LimitSupports Storm ControlManagementIPv4 and IPv6 dual stack managementWeb switch managementConsole/Telnet Command Line InterfaceSNMP v1 and v2c switch managementSSHv2, TLSv1.2 and SNMP v3 secure accessFirmware upload/download via HTTP/TFTPConfiguration upload / download through Web interfaceHardware reset button for system reboot or reset to factory defaultSNTP Network Time ProtocolNetwork DiagnosticLink Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
Features
Enhanced Network Management with ERPS
This 14 port industrial switch includes Ethernet Ring Protection Switching (ERPS), which provides robust link protection and ensures high availability in network configurations. ERPS facilitates rapid recovery from network failures, minimizing downtime and maintaining uninterrupted service. This advanced protocol enhances overall network resilience, ensuring that operations continue smoothly even in the face of challenges, ultimately supporting business continuity.
Advanced Traffic Management Features
This 14 port managed industrial switch supports a wide range of advanced traffic management features, including VLANs, Quality of Service (QoS), and Link Aggregation Control Protocol (LACP). VLAN support allows for the segmentation of network traffic, enhancing security and improving performance by reducing broadcast domains. QoS enables the prioritization of critical data packets, ensuring that time-sensitive information, such as voice and video, receives the bandwidth it needs. LACP further enhances network efficiency by combining multiple links into a single logical connection, increasing throughput and providing redundancy. These features collectively contribute to a more organized and efficient network environment.
Robust Security Features
Security is paramount in industrial applications, and BENCHU GROUP's IES7511-10GE4GF-DC provides advanced security measures to protect sensitive data and network integrity. It supports SSH for secure remote management, allowing administrators to configure and monitor the switch safely. Additionally, features such as Access Control Lists (ACLs) and 802.1X authentication ensure that only authorized devices can connect to the network. This multi-layered approach to security helps mitigate potential threats, protecting the organization from unauthorized access and data breaches. By implementing these security measures, businesses can safeguard their operations and maintain compliance with industry regulations.
Wide Operating Temperature Range
Designed to function in extreme conditions, this 14 port managed industrial switch operates reliably in temperatures ranging from -40°C to 85°C. This wide temperature range ensures that the switch can handle harsh environments, including factories, outdoor installations, and transportation hubs. The ability to withstand extreme heat and cold without compromising performance makes this switch ideal for industries such as manufacturing, logistics, and energy.
Robust ESD Protection
The IES7511-10GE4GF-DC features enhanced electrostatic discharge (ESD) protection, safeguarding connected equipment from voltage spikes and surges. With ±8KV contact and ±15KV air discharge protection, the IES7511-10GE4GF-DC minimizes the risk of damage caused by static electricity, which can be particularly problematic in industrial settings. This protection ensures the longevity of both the switch and connected devices, reducing maintenance costs and improving reliability. By incorporating robust ESD protection, businesses can confidently deploy this switch in environments where electrical interference is a concern, ensuring stable and secure operations.
User-Friendly Installation and Management
Installation and management of the IES7511-10GE4GF-DC are designed to be straightforward and user-friendly. The switch supports DIN rail mounting, making it easy to install in various locations while ensuring secure placement. For management, the switch features a web interface, CLI, and SNMP, allowing for flexible and convenient configuration. Users can easily monitor network performance, configure settings, and troubleshoot issues through these interfaces. This combination of easy installation and comprehensive management tools empowers organizations to optimize their networks effectively, enhancing productivity and operational efficiency.
Connectivity Solutions
14 Port Gigabit Managed Industrial Switch Connectivity Solution
14 Port Gigabit Managed Industrial Switch Ring Network Connectivity Solution
Specification
Technical Specifications :
IE7511-10GE4GF-DC10M/100M/1G RJ45 copper ports :
101.25G SFP (fiber) ports :
4Console Port (For config ) :
YesReset button :
YesPerformance Specification :
*Packet buffer memory :
8.2 MbForwarding modes :
Store-and-forwardBandwidth :
32 GbpsPacket forwarding rate :
20.84Mpps (64 byte packet size)MAC address database size :
8K (48-bit MAC ad-dresses)Jumbo frame support :
9KMean Time Between Failures :
158,124 hours (MTBF) @ 25°C100M Copper Latency :
8.532µs; 8.613µs; 8.712µs1G Copper Latency :
3.435µs; 3.541µs; 3.643µs1G Fiber Latency :
2.993µs; 3.112µs; 3.183µsL2 Services - VLANs :
*IEEE 802.1Q VLAN tagging :
YesQinQ VLAN tagging :
YesIP-based VLANs :
YesMAC-based VLANs :
YesProtocol-based VLAN :
YesVoice VLAN :
YesVLAN mapping :
YesL2 Services - Availability :
*Storm control :
Yes (Broadcast, multicast, unknown unicast)IEEE 802.3ad - LAGs (LACP) :
YesIEEE 802.3x :
YesRing (ERPS,complies with G.8032) :
Yes, Recovery time < 50msIEEE 802.1D Spanning Tree Protocol :
YesIEEE 802.1w Rapid Spanning Tree Protocol :
YesIEEE 802.1s Multiple Spanning Tree Protocol :
YesLayer 2 DHCP Relay :
YesL2 Services - Multicast Filtering :
YesIGMP snooping (v1, v2 and v3) :
YesMLD snooping support (v1 and v2) :
YesIGMP snooping querier (v2) :
YesMLD snooping querier (v1) :
YesMulticast VLAN Registration (MVR) :
YesL3 Services - Routing :
*IPv4 static routing :
100IPv6 static routing :
100Link Aggregation :
*Manual LAG :
Yes# of LAGs / # of members in each LAG :
8 LAGs with max 8 members in each LAGNetwork Monitoring and Discovery Services :
*802.1ab LLDP :
YesSNMP :
v1, v2c, v3RMON group 1,2,3,9 :
YesNetwork Security :
YesIEEE 802.1x :
YesRADIUS accounting :
YesAccess Control Lists (ACLs) :
YesIP-based ACLs (IPv4 and IPv6) :
L2 / L3 / L4MAC-based ACLs :
YesTCP/UDP-based ACLs :
YesControl MAC # static entries :
48Port-based security by locked MAC addresses :
YesDynamic ARP inspection :
YesDoS protection :
YesDoS attacks prevention :
YesNetwork storm protection, DoS :
YesQuality of Service (QoS) :
*Port-based rate limiting :
Yes ingress and egressPort-based QoS :
YesSupport for IPv6 fields :
YesDiffServ QoS :
Yes ingressIEEE 802.1p COS :
YesDestination MAC and IP :
YesIPv4 and v6 DSCP :
YesTCP/UDP-based :
YesWeighted Round Robin (WRR) :
YesStrict priority queue technology :
YesIEEE Network Protocols :
*Protocols :
• IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LXProtocols 2 :
• IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D Spanning Tree (STP) • IEEE 802.1s Multiple Spanning Tree (MSTP) • IEEE 802.1w Rapid Spanning TManagement, Monitoring & Troubleshooting :
*Password management :
YesAccess control via RADIUS and TACACS+ :
YesIPv6 management :
YesSNMP v1/v2c/v3 :
YesPort mirroring :
Yes ingress and egressMany-to-one port mirroring :
14Cable test utility :
YesTLS/HTTPS Web-based access (version) :
Yes (v1.2)File transfers (uploads, downloads) :
TFTP / HTTPHTTP upload/download (firmware) :
YesSyslog (RFC 3164) :
YesLEDs :
YesPer port :
Speed, Link, Activity; PoE in different modePer device :
PowerPhysical Specifications :
*Dimensions (Width * Depth * Height) :
48 x 135 x 170 mm (1.89 x 5.31 x 6.69 in)Weight :
1.1 kg (1.98 lb)Shell protection :
P40 high-strength aluminum casePower Requirements :
DC 12~54V, redundant power with reverse polarity protectionMax power :
12W (worst case, all ports used, line-rate traffic) (Watts)Iddle power consumption :
7W (all ports link-down standby) (Watts)Energy Efficient Ethernet (EEE) :
Yes (deactivated by default)Fan :
FanlessEnvironmental Specifications :
*Operating Temperature :
-40° to 85°C (-40° to 185°F)Operating Humidity :
95% maximum relative humidity (RH), non-condensingOperating Altitude :
10,000 ft (3,000 m) maximumStorage Temperature :
-40° to 85°C (-40° to 185°F)Storage Humidity (relative) :
95% maximum relative humidity, non-condensingStorage Altitude :
10,000 ft (3,000 m) maximumExecutive Standard & Protection :
*Lightning Protection :
*IEC61000-4-3 (RS) :
10V/m (80~1000MHz)FCC Part 15/CISPR22 (EN55022) :
Class BIEC61000-6-2 :
Common Industrial StandardIEC61000-4-9 (Pulsed magnet field) :
1000A/mIEC61000-4-10 (Damped oscillation) :
30A/m, 1MHzIEC61000-4-12/18 (Shockwave) :
CM 2.5kV, DM 1kVIEC61000-4-4(EFT) :
Power cable:±4kV, Data cable: ±2kVIEC61000-4-16(Common-mode transmission) :
30V, 300V, 1sIEC61000-4-2 (ESD) :
±8kV contact discharge, ±15kV air dischargeIEC61000-4-6 (Radio frequency transmission) :
10V(150kHz~80MHz)IEC61000-4-8 :
100A/m, 1000A/m, 1s-3sIEC61000-4-5 (Surge): Power cable :
CM±4kV/ DM±2kV, Data cable: ±4kVMechanical Properties :
*IEC60068-2-6 :
Anti VibrationIEC60068-2-32 :
Free FallIEC60068-2-27 :
Anti ShockElectromagnetic Emissions and Immunity :
*Certifications :
CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013Safety :
*Safety Certifications :
CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)Warranty and Support :
*Hardware Limited Warranty :
Limited Lifetime*Technical Support via Phone and Email* :
Limited Lifetime*24x7 Online Chat Technical Support :
Limited Lifetime*Package Contents :
*All models :
Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guideBusiness Type :
IndustrialBandridth :
1GMore Filters :
L2+ Managed
Questions & Answers
1. What applications is the IES7211-10GE4GF-DC best suited for?
This switch is ideal for industrial automation, transportation, and mission-critical applications, offering high-speed data transfer and seamless integration with fiber-based infrastructures for demanding environments.
2. How does the 10 Gigabit Ethernet benefit my network?
The 10 Gigabit Ethernet ports ensure high-speed, low-latency data transfers, making this switch perfect for bandwidth-intensive applications that require fast and reliable communication between devices.
3. Can I use fiber optic connections with this 14 Ports gigabit managed industrial switch?
Yes, the switch is equipped with 4 Gigabit SFP uplink ports, offering flexibility for fiber-optic connections. This allows extended network reach and smooth integration with existing fiber infrastructures, enhancing scalability.
4. What network management features does this 14 Ports gigabit managed industrial switch support?
The IES7211-10GE4GF-DC supports Layer 2 and Layer 3 features such as VLANs, QoS, static routing, and IGMP snooping. These features optimize traffic flow, ensure network efficiency, and improve overall management.
5. Is this 14 Ports gigabit managed industrial switch durable enough for harsh industrial environments?
Yes, with an IP40-rated metal housing and an operating temperature range of -40°C to 85°C, this switch is designed for durability in demanding environments, offering protection against dust, moisture, and extreme temperatures.
Downloads
Related Products
-
IES7511-4GE2GF-DC4 Ports Gigabit Managed Industrial Switch With 2 Gigabit SFP Uplink
-
IES7511-8GE2GF-DC8 Ports Gigabit Managed Industrial Switch With 2 Gigabit SFP Uplink
-
IES7511-16GE12GF-DC16 Port Gigabit RJ45 And 12 Port Gigabit SFP Industrial Managed Ethernet Switch
-
IES7511-24GE2GF-DC24 Port Gigabit Managed Industrial Ethernet Switch With 2 Gigabit SFP Uplink