English 
Overview
POE-SP01-AT, 24W High Power PoE Splitter
BENCHU GROUP's POE-SP01-AT 24-watt Hight Power PoE Splitter is a versatile device designed to expand network capabilities by enabling non-PoE devices to be powered through a single Ethernet cable. Compliant with the IEEE 802.3af/at standards, this splitter supports both mid-span (4/5+, 7/8-) and end-span (1/2+, 3/6-) modes, providing flexibility in various network setups. It delivers a 24-watt output, making it ideal for devices such as IP cameras, wireless access points, and VoIP phones. With an adjustable output voltage range from 5V to 24VDC (default 12VDC), it caters to different device requirements while maintaining low ripple for stable power. The splitter also features essential protections against short circuits, overcurrent, and overtemperature, ensuring reliable and safe operation. Additionally, its high 3500V voltage isolation between input and output stages enhances safety by preventing electrical faults, making it a dependable choice for various industrial and commercial applications.
Plug-and-play design. Simply connect the input Ethernet cable from a PoE switch or injector, and the splitter will output separate power and data connections to the target device. This simplifies the deployment process, especially in locations where running additional power lines is impractical.Its safe, Stable, easy installation, and weather-resistant features make it an essential tool for enhancing network infrastructure in outdoor settings.
Features
24-Watt High Power Output
The POE-SP01-AT High-Power PoE splitter delivers up to 24 watts of power, making it suitable for high-powered devices like IP cameras, wireless access points, and VoIP phones. Its robust power output ensures that devices requiring more energy operate efficiently without additional power adapters, simplifying network installations.
Universal Compatibility
The POE-SP01-AT high power POE splitter supports active and passive PSE input, supports 48V~56V input voltages and can adapt to different network environments. The POE-SP01-AT comply with IEEE 802.3af/at standards, providing flexibility for integrating non-PoE devices into existing PoE networks without needing additional infrastructure changes.
Safety Features
Equipped with comprehensive protection mechanisms, including short circuit, overcurrent, and overtemperature protections, the POE-SP01-AT high power splitter ensures safe operation. These features protect both the POE splitter and connected devices from potential damage caused by power surges or electrical faults, enhancing overall network reliability.
Easy Installation and Integration
The POE-SP01-AT high power POE splitter’s compact design and plug-and-play functionality make it simple to install, requiring no additional configuration. It integrates seamlessly into existing network setups, providing a straightforward solution for powering non-PoE devices over Ethernet. This ease of use reduces deployment time and minimizes technical complexities.
Connectivity Solutions
High Power PoE splitter Connectivity Solution
Specification
| Model | PoE-EX01-AT |
| Hardware Specifications | |
| Interface |
PoE in Port: 1 x 10/100BASE-T Ethernet POE PD In Out Port: 1x 10/100BASE-T Ethernet and 1 DC 12V Out， |
| Ethernet Port |
Ethernet port can support 10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption |
| Network Cable | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) |
| Transmission Bandwidth (Rate) | 10/100Mbps |
| Dimension (L*W*H) | 70*25*25mm, cable length:≤120mm |
| Weight | 70g |
| Power over Ethernet (PoE) Specifications | |
| PoE Standard | PoE in Port：IEEE 802.3af/at PoE PD |
| Input Voltage | 44-57V DC |
| Power Pin Assignment | 1/2 (+), 3/6 (-) & 4/5 (+), 7/8 (-) |
| Output Voltage | Default 12VDC± 1.5V, optional 5V,9V,24VDC Default DC5521 plug, |
| Power Consumption | Standby<1W, Full Load<25W |
| Standards Conformance | |
| Standards Compliance |
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Etherne IEEE 802.3at Power over Ethernet Plus |
| Stability Testing |
IEC 60068-2-32 (Free fall) IEC 60068-2-27 (Shock) IEC 60068-2-6 (Vibration) |
| Temperature |
Operating: -20~55 degrees C Storage: -40~75 degrees C |
| Humidity |
Operating: 5~90%, (non-condensing) Storage: 5~90% (non-condensing) |
| Regulatory Compliance | FCC Class A, CE Class A |
.
Related Products
E-Mail Us
Call Us
Address
IPv6 network supported