Industrial DIN Rail PoE Power Supply, 240-watt PoE Power Adaptor, IES7211-P240-48V

Specification

• MODEL :

  IES7211-P240-48V

• OUTPUT :

  *

• DC VOLTAGE :

  48V

• RATED CURRENT :

  5A

• CURRENT RANGE :

  0 ~ 5A

• RATED POWER :

  240W

• RIPPLE & NOISE (max.) Note.2 :

  150mVp-p

• VOLTAGEADJ. RANGE :

  48 ~ 55V

• VOLTAGE TOLERANCENote.3 :

  ±1.0%

• LINE REGULATION :

  ±0.5%

• LOAD REGULATION :

  ±1.0%

• SETUP, RISE TIME :

  1500ms, 100ms/230VAC; 3000ms, 100ms/115VAC at full load

• HOLD UPTIME (Typ.) :

  28ms/230VAC; 22ms/115VAC at full load

• INPUT :

  *

• VOLTAGE RANGE Note.6 :

  90 ~ 264VAC; 127 ~ 370VDC

• FREQUENCYRANGE :

  47 ~ 63Hz

• EFFICIENCY(Typ.) :

  90%

• AC CURRENT (Typ.) :

  2.5A/115VAC; 1.3A/230VAC

• INRUSH CURRENT (Typ.) :

  20A/115VAC; 35A/230VAC

• LEAKAGE CURRENT :

  <1mA/ 240VAC

• PROTECTION :

  *

• OVERLOAD :

  105 ~ 130% rated output power [Protection type :Constant current limiting, recovers automatically after fault condition is removed]

• OVER VOLTAGE :

  56 ~ 65V [Protection type : Shut down o/p voltage, re-power on to recover]

• OVER TEMPERATURE :

  Shut down o/p voltage, recovers automatically after temperature goes down

• ENVIRONMENT :

  *

• WORKING TEMP. :

  -20 ~ +70 (Refer to "Derating Curve")

• WORKING HUMIDITY :

  20 ~ 95% RH non-condensing

• STORAGE TEMP., HUMIDITY :

  -40 ~ +85 , 10 ~ 95% RH

• TEMP. COEFFICIENT :

  士0.03%/℃(0-50℃)

• VIBRATION :

  Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X,Y, Z axes; Mounting: Compliance to IEC60068-2-6

• SAFETY& EMC (Note 4) :

  *

• SAFETYSTANDARDS :

  UL508,TUV BS EN/EN62368-1, ,EAC TP TC 004 BSMI CNS14336-1, , BIS IS13252(Part1): 2010/IEC 60950-1:2005(NOTE 8),KC K60950-1(for 48V only)approved; (meet BS EN/EN60204-1)

• WITHSTAND VOLTAGE :

  I/P-O/P:3KVAC; I/P-FG:2KVAC; O/P-FG:0.5KVAC

• ISOLATION RESISTANCE :

  I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH

• EMC EMISSION :

  Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3,EAC TP TC 020, CNS13438, KSC 9832(for 48V only)

• EMC IMMUNITY :

  Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,BS EN/EN55035,BS EN/EN61000-6-2(BS EN/EN50082-2),BS EN/EN61204-3, heavy industry level, EAC TP TC 020,KSC 9835(for 48V only)

• OTHERS :

  *

• MTBF :

  1645.2K hrs min. Telcordia SR-332 (Bellcore) ; 230.2K hrs min. MIL-HDBK-217F (25℃)

• DIMENSION :

  63*125.2*113.5mm (W*H*D)

• PACKING :

  1Kg; 12pcs/13Kg/1.22CUFT

• NOTE 1 :

  All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

• NOTE 2 :

  Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 μ F & 47 μ F paralel capacitor.

• NOTE 3 :

  Tolerance : includes set up tolerance, line regulation and load regulation.

• NOTE 4 :

  Derating may be needed under low input voltage. Please check the derating curve for more details.

• NOTE 5 :

  Installation clearances : 40mm on top, 20mm on the botom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended.

• NOTE 6 :

  The power supply is considered a component which wil be instaed into a final ecuioment. For guidance on how to perform these EMC tests, please refer to "EMl testing of component power supplies."

• NOTE 7 :

  The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operaing altitude higher than 2000m(6500ft).

• Business Type :

  Industrial