Factory Specs & Quotes
Get unbranded (white-label) PDF datasheets and custom MOQ options directly from our engineering team. Fast 24-hour response. 100% Privacy Guaranteed. No spam.
An 8-port PoE switch for IP cameras connects up to eight PoE-powered cameras to a network while transmitting data and supplying electrical power over Ethernet cables. The right switch depends on camera power consumption, network speed, uplink connectivity, management requirements, and installation conditions.
For surveillance equipment buyers, distributors, and system integrators, selecting the right configuration helps prevent insufficient power, network bottlenecks, and unnecessary equipment costs. BENCHU offers 8-port PoE solutions ranging from Fast Ethernet models to Gigabit switches, managed configurations, industrial PoE+ switches, and high-power PoE++ options.
This guide explains how to match switch configurations to the actual requirements of an IP camera surveillance project.
Start with the main requirement of your surveillance project. These ten configurations address different needs, including cost, access speed, fiber connectivity, management, industrial conditions, and high-power cameras.
01 / LOW-COST SOLUTION
Eight 10/100 Mbps PoE+ ports and two 10/100 Mbps RJ45 uplinks.
Consider this model for a straightforward, cost-sensitive surveillance network where Fast Ethernet access and uplinks fit the planned network architecture. Before choosing it, check the camera stream settings, NVR connection, and whether the shared uplink has enough capacity for the traffic that must cross it.
02 / COST-EFFICIENT NETWORK WITH GIGABIT UPLINKS
Eight 10/100 Mbps PoE+ access ports and two Gigabit RJ45 uplinks.
Consider this configuration when Fast Ethernet camera access is appropriate for the project, but the connection from the switch to the NVR or upstream network benefits from Gigabit capacity. The faster uplink provides more room for traffic aggregated from multiple cameras and other devices.
03 / COST-EFFICIENT FIBER NETWORK
Eight 10/100 Mbps PoE+ ports, two Gigabit RJ45 uplinks, and one Gigabit SFP uplink.
Consider this model when the cameras can use Fast Ethernet access but the network requires an SFP connection to a fiber backbone, remote cabinet, or upstream switch. Verify the transceiver, fiber type, link distance, and uplink capacity for the installation.
04 / GIGABIT NETWORK WITH RJ45 UPLINKS
Eight Gigabit PoE ports and two Gigabit RJ45 uplinks.
Choose this type of configuration when the cameras or network design call for Gigabit access capacity and the upstream connection uses copper Ethernet. It offers more link capacity for demanding streams and gives the network more flexibility for future camera upgrades.
05 / GIGABIT FIBER NETWORK
Eight Gigabit PoE ports, two Gigabit RJ45 uplinks, and one SFP uplink.
Another option is SP5210-8PGE2GF, which provides eight Gigabit PoE ports and two Gigabit SFP uplinks.
Choose between these models according to whether the upstream network needs copper Ethernet, fiber, or both. Gigabit access is useful when the camera traffic profile or future expansion calls for more link capacity.
06 / MANAGED GIGABIT NETWORK
Managed Gigabit PoE+ switch with two Gigabit SFP uplinks.
Consider this model when the surveillance system needs Gigabit camera access, fiber uplinks, and network management. Features such as VLAN configuration, monitoring, and PoE controls can help administrators organize and troubleshoot the network. Confirm the available features and PoE budget in the current datasheet.
07 / INDUSTRIAL SURVEILLANCE
Industrial Gigabit PoE+ switch with two Gigabit SFP uplinks.
Consider this model for industrial cabinets, roadside enclosures, and other demanding locations where standard PoE+ power is adequate but environmental and installation requirements are more demanding. Verify operating temperature, DC input, mounting, and protection specifications against the actual site conditions.
08 / MANAGED INDUSTRIAL SURVEILLANCE
Managed industrial Gigabit PoE+ switch with fiber uplinks.
Choose this type when the project needs both industrial hardware and managed network functions. The management layer can help with VLAN configuration, network monitoring, and supported redundancy features. Confirm the required functions are supported by the specific model.
09 / HIGH-POWER PTZ CAMERAS
Industrial switch with four ports supporting up to 90W PoE++ each, four PoE+ ports, and two Gigabit SFP uplinks. Published total PoE budget: 240W.
Consider this configuration when compatible PTZ cameras, heaters, illuminators, or other devices require more power than standard PoE+ can provide. Verify the IEEE PoE standard, maximum device power, per-port limits, and total power budget before deployment.
10 / MANAGED HIGH-POWER INDUSTRIAL NETWORK
Managed industrial PoE++ switch with four 90W PoE++ ports, four PoE+ ports, and two Gigabit SFP uplinks.
Consider this model when high-power camera support, industrial installation requirements, and managed networking are all important. Confirm the exact management functions, port power allocation, and total PoE budget in the latest datasheet.
HOW TO READ THESE RECOMMENDATIONS
These models solve different design problems; they are not simply ranked from basic to advanced. Choose according to the actual camera traffic profile, the path to the NVR or upstream network, power requirements, management needs, and installation environment. The explanation for each model identifies what to verify before treating it as a suitable match.
The switch's per-port output and total PoE budget both matter. The connected cameras must receive enough power individually, while the combined demand must remain within the switch's total budget.
IEEE 802.3af
15.4W
For compatible lower-power IP cameras and network devices.
IEEE 802.3at
30W
For compatible cameras with higher power requirements or additional functions.
IEEE 802.3bt
Up to 90W
For compatible high-power cameras and other devices requiring more than PoE+.
Many standard IP cameras can use PoE or PoE+, while some PTZ cameras, heaters, and specialized devices require more power. For high-power deployments, the IES7211-8PGE2GF-4BT-DC and IES7511-8PGE2GF-4BT-DC provide four designated 90W PoE++ ports and a 240W total PoE budget.
Remember that the maximum rating of each port is not the same as the total power available to all connected devices.
Fast Ethernet supports 10/100 Mbps links, while Gigabit Ethernet supports up to 1000 Mbps. Select the access speed according to each camera's configured video bitrate, the number of active streams, recording and viewing requirements, and the capacity needed for future expansion. A camera does not automatically use 100 Mbps continuously; its actual traffic depends on its resolution, frame rate, codec, scene complexity, and stream settings.
COST-EFFICIENT ACCESS
Fast Ethernet can be a cost-effective option when the camera traffic and overall network design fit 10/100 Mbps access. It is suitable for compatible surveillance systems where the selected access speed provides sufficient capacity for normal operation.
Models: SP5200-8PFE2FE and SP5200-8PFE2GE.
MORE LINK CAPACITY
Gigabit Ethernet provides higher link capacity for networks with heavier video traffic, simultaneous live viewing and recording, or planned camera upgrades. It can also provide more room for traffic aggregated from multiple camera ports.
Models: SP5200-8PGE2GE and SP5210-8PGE2GE1GF.
HOW TO SELECT THE RIGHT SPEED
Estimate network demand from the cameras' actual configured bitrates and the streams that will cross each link. Include simultaneous recording, live-view clients, and other network traffic where applicable. Avoid assuming that every camera continuously consumes 100 Mbps. The uplink should have enough capacity for the traffic it carries, with reasonable allowance for peak demand and future expansion.
A typical surveillance layout showing PoE-powered cameras, the switch, the NVR, and the router or monitoring network.
English 
src attribute; keep the rest of the code unchanged.The main difference is the level of control available to installers and network administrators. Choose according to the operational requirements of the project rather than assuming that a managed switch is always necessary.
EASY INSTALLATION
Unmanaged switches are suitable for straightforward installations that need basic network connectivity and PoE power without extensive configuration.
Models to consider: SP5200-8PFE2GE, SP5200-8PGE2GE, and SP5210-8PGE2GF.
NETWORK CONTROL
Managed switches are useful when a network needs configurable settings, monitoring, traffic separation, or more detailed troubleshooting.
Consider SP6500-8PGE2GF for managed Gigabit networks, or IES7511-8PGE2GF-DC for managed industrial installations.
Industrial PoE switches are designed for demanding installations such as factory floors, roadside cabinets, transportation facilities, utility sites, and outdoor enclosures. Depending on the model, they may offer wide operating temperature support, surge protection, DIN-Rail mounting, and industrial DC power inputs to suit installation conditions beyond a typical office environment.
Choose industrial PoE+ when standard PoE+ power meets the camera requirements but the installation needs industrial hardware.
Recommended model: IES7211-8PGE2GF-DC
Choose industrial PoE++ when the site needs industrial hardware and connected devices require higher power than PoE+ can supply.
Recommended model: IES7211-8PGE2GF-4BT-DC. For managed networking, consider IES7511-8PGE2GF-4BT-DC.
INDUSTRIAL INSTALLATION CHECKLIST
Wide-temperature range, surge-protection rating, IP rating, DC input-voltage range, redundant power support, and mounting method vary by model. Match these specifications to the site's temperature, electrical supply, cabinet design, and exposure conditions. Do not assume that every industrial feature is available on every switch.
A remote industrial surveillance layout using a fiber backbone, industrial PoE++ switching, and mixed-power cameras.
src attribute; keep the rest of the code unchanged.Use this matrix to match common deployment requirements with specific BENCHU Group models. The recommendations are for evaluation; final selection should reflect camera specifications, network architecture, power requirements, and site conditions.
| Deployment Requirement | Recommended Model | Reason |
|---|---|---|
| Balance cost and convenient Fast Ethernet connectivity for efficient surveillance | SP5200-8PFE2FE | Provides Fast Ethernet PoE access and Fast Ethernet RJ45 uplinks for a straightforward network design. |
| Connect Fast Ethernet cameras with higher-capacity copper uplinks | SP5200-8PFE2GE | Combines Fast Ethernet PoE access with two Gigabit RJ45 uplinks, providing more uplink capacity for aggregated camera traffic. |
| Connect Fast Ethernet cameras over a fiber-enabled network | SP5200-8PFE2GE1GF | Provides an SFP uplink option for fiber connectivity while retaining Fast Ethernet PoE camera access. |
| Connect Gigabit cameras through copper uplinks | SP5200-8PGE2GE | Provides Gigabit PoE access and two Gigabit RJ45 uplinks for copper-based surveillance networks that need greater link capacity. |
| Connect Gigabit cameras using a mix of RJ45 and fiber uplinks | SP5210-8PGE2GE1GF | Combines Gigabit PoE access with Gigabit RJ45 and SFP uplink options for networks using both copper and fiber. |
| Connect Gigabit cameras with two SFP uplinks | SP5210-8PGE2GF | Provides Gigabit PoE access and two Gigabit SFP uplinks for fiber-based uplink designs. |
| Manage a Gigabit surveillance network with fiber uplinks | SP6500-8PGE2GF | Combines Gigabit PoE+ access, SFP uplinks, and network management functions for projects that require configurable network control. |
| Use standard PoE+ devices in an industrial surveillance installation | IES7211-8PGE2GF-DC | Industrial hardware and DC power features can suit demanding installation environments where connected cameras use standard PoE+ power. |
| Deploy managed networking in an industrial surveillance system | IES7511-8PGE2GF-DC | Combines industrial deployment suitability with network management capabilities for projects that need managed functions. |
| Use both high-power and standard-power devices in an industrial network | IES7211-8PGE2GF-4BT-DC | Provides four 90W PoE++ ports and four PoE+ ports, supporting a combination of high-power and standard-power devices. Check port limits and total PoE budget for the deployment. |
| Manage an industrial surveillance network with high-power devices | IES7511-8PGE2GF-4BT-DC | Offers an industrial PoE++ option for projects requiring high-power ports, industrial installation features, and supported network management functions. |
Yes. An 8-port PoE switch can connect up to eight PoE cameras through its eight PoE access ports. The switch's total PoE budget and network capacity must suit the connected devices.
Many standard camera systems can use a 120W PoE budget. Systems with higher-power cameras may need a larger budget, such as the 240W industrial PoE++ models. The appropriate capacity depends on the connected devices' power demand.
Fast Ethernet can suit cost-sensitive camera networks with compatible traffic requirements. Gigabit provides more link capacity for demanding streams and future expansion. The uplink and NVR connection also affect network performance.
Choose an industrial model for demanding environments that need features such as wide operating temperature support, DIN-Rail mounting, or industrial DC power. Select PoE+ or PoE++ according to the power requirements of the connected devices.
The main factors when selecting an 8-port PoE switch for IP cameras are total PoE budget, per-port power, network speed, uplink connectivity, management requirements, and installation environment.
For cost-sensitive systems, consider the SP5200 Fast Ethernet models. For Gigabit camera networks, compare the SP5200 and SP5210 Gigabit models. For managed or industrial installations, consider the SP6500 and IES series. For compatible high-power cameras, the industrial PoE++ models offer designated 90W ports and a 240W total PoE budget.
BENCHU / PROJECT SUPPORT
BENCHU provides PoE networking solutions for surveillance brands, distributors, system integrators, and OEM/ODM customers. Contact our team to discuss product configurations, PoE power budgets, uplink options, and brand customization for your project.
E-Mail Us
Call Us
Address5F, Block5, GuangmingGu Industrial Park, Matian Villiage, Guangming Disitrict, Shenzhen, China
IPv6 network supported