Overview
IES7511-8PGE2GF-SOL, Layer 2 Managed 8 Ports Gigabit Solar Industrial PoE+ Switch,with 2 Gigabit SFP Uplink,DIN-Rail mount, Support DC 12V/24V input and IEEE802.3at PoE output
Features
Gigabit Ethernet Port and Gigabit Fiber Port Configuration
Bench group's IES7511-4PGE2GF-SOL gigabit managed solar industrial PoE switch provide 4 PoE+ 10/100/1000Mbps RJ45 ports and 2-1.25G SPF,with 1-RJ45 console interface for switch management and setup, with 1-Reset button for system factory default and reboot, support IEEE820.3af/at provide up to 30W per PoE port, support redundant power. DC Input Voltage 12V/24V/48V
Disign for Solar Power, Wind Power Industrial field
Benchu Group's IES7511-8PGE2GF-SOL Industrial PoE switch is an advanced solution designed to meet the demanding requirements of industrial environments, especially where traditional power sources are either unreliable or unavailable. This switch is powered by a versatile DC 12V-48V power supply, making it adaptable to a variety of renewable energy sources, such as solar and wind power. Each of its PoE ports can deliver a maximum of 30W, sufficient for powering IP cameras and other PoE-enabled devices, thereby simplifying the deployment of surveillance and wireless networks in remote or off-grid locations.
Ethernet Ring Protection Switching (ERPS) Gives to Fast Recovery
The IES7511-8PGE2GF-SOL support Ethernet Ring Protection Switching (ERPS) provides enhanced network redundancy by creating a ring topology that ensures continuous data flow. If a link fails, the network automatically reroutes traffic to maintain connectivity. This rapid failover mechanism minimizes downtime and maintains high availability, crucial for mission-critical applications. ERPS's self-healing capability ensures that network operations continue smoothly without manual intervention, providing a reliable and robust networking solution that meets the demands of modern enterprise environments.
SNMP (Simple Network Management Protocol) Gives to Centralized Network Management
The 8 port solar industrial PoE switch IES7511-8PGE2GF-SOL support SNMP applications enhance the security of industrial switches by providing detailed monitoring and management of network devices. Security features such as authentication, encryption, and access controls can be implemented to protect against unauthorized access and cyber threats. SNMP also allows for the monitoring of security parameters and detection of suspicious activities, enabling proactive measures to safeguard critical industrial systems and data from potential breaches.
SSH (Secure Shell) gives to Secure File Transfers
Benchu group's 24 port gigabit PoE Switch S7500-24GE4GC-L2M support SSH (Secure Shell),Industrial networks often require firmware updates, configuration backups, and log file transfers. SSH supports secure file transfer protocols like SCP (Secure Copy Protocol) and SFTP (SSH File Transfer Protocol), which encrypt files during transit. This ensures that sensitive data, such as configuration files and system logs, are not exposed to potential attackers during transfer. Regular firmware updates are crucial for patching security vulnerabilities and enhancing switch performance. With SSH-enabled secure file transfers, The industrial PoE switch S7500-24GE4GC-L2M can be updated and maintained without risking data security.
IPV4/IPV6 gives to Enhanced Network Scalability
The IPv4/IPv6 dual stack protocol ensures that Bench group's 8 port gigabit solar industrial PoE switch is future-proofed, allowing them to operate seamlessly in both current and future network environments. IPv4 addresses are limited, but IPv6 offers a vastly larger address space. By supporting both protocols, dual stack solar industrial switches enable significant network scalability. This is crucial for expanding industrial operations that require more devices and sensors connected to the network. The abundant IPv6 addresses ensure that the network can grow without running into addressing limitations, supporting large-scale deployments and IoT integration.
Connectivity Solutions
Managed 8 port Gigabit solar Industrial PoE switch with 2 Gigabit SFP Uplink of connectivity Solution

Specification
- Technical Specifications : IE7511-8PGE2GF-SOL
- 10M/100M/1G RJ45 copper ports : 8
- 1.25G SFP (fiber) ports : 2
- PoE / PoE+ ports : 8
- Console Port (For config ) : Yes
- Reset button : Yes
- Power over Ethernet : *
- PoE Standard : IEEE 802.3at Power over Ethernet Plus/PSE; Backward compatible with IEEE 802.3af Power over Ethernet
- PoE Power Supply Type : End-span: 1/2 (+), 3/6 (-)
- PoE Power Output : Per port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af); Per port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
- Performance Specification : *
- Packet buffer memory : 2.1 Mb
- Forwarding modes : Store-and-forward
- Bandwidth : 24 Gbps
- Packet forwarding rate : 14.88Mpps (64 byte packet size)
- MAC address database size : 8K (48-bit MAC ad-dresses)
- Jumbo frame support : 9K
- Mean Time Between Failures : 156,996 hours (MTBF) @ 25°C
- 100M Copper Latency : 8.532µs; 8.613µs; 8.712µs
- 1G Copper Latency : 3.435µs; 3.541µs; 3.643µs
- 1G Fiber Latency : 2.993µs; 3.112µs; 3.183µs
- L2 Services - VLANs : *
- IEEE 802.1Q VLAN tagging : Yes
- QinQ VLAN tagging : Yes
- IP-based VLANs : Yes
- MAC-based VLANs : Yes
- Protocol-based VLAN : Yes
- Voice VLAN : Yes
- VLAN mapping : Yes
- L2 Services - Availability : *
- Storm control : Yes (Broadcast, multicast, unknown unicast)
- IEEE 802.3ad - LAGs (LACP) : Yes
- IEEE 802.3x : Yes
- Ring (ERPS,complies with G.8032) : Yes, Recovery time < 50ms
- IEEE 802.1D Spanning Tree Protocol : Yes
- IEEE 802.1w Rapid Spanning Tree Protocol : Yes
- IEEE 802.1s Multiple Spanning Tree Protocol : Yes
- Layer 2 DHCP Relay : Yes
- L2 Services - Multicast Filtering : Yes
- IGMP snooping (v1, v2 and v3) : Yes
- MLD snooping support (v1 and v2) : Yes
- IGMP snooping querier (v2) : Yes
- MLD snooping querier (v1) : Yes
- Multicast VLAN Registration (MVR) : Yes
- L3 Services - Routing : *
- IPv4 static routing : 100
- IPv6 static routing : 100
- Link Aggregation : *
- Manual LAG : Yes
- # of LAGs / # of members in each LAG : 8 LAGs with max 8 members in each LAG
- Network Monitoring and Discovery Services : *
- 802.1ab LLDP : Yes
- SNMP : v1, v2c, v3
- RMON group 1,2,3,9 : Yes
- Network Security : Yes
- IEEE 802.1x : Yes
- RADIUS accounting : Yes
- Access Control Lists (ACLs) : Yes
- IP-based ACLs (IPv4 and IPv6) : L2 / L3 / L4
- MAC-based ACLs : Yes
- TCP/UDP-based ACLs : Yes
- Control MAC # static entries : 48
- Port-based security by locked MAC addresses : Yes
- Dynamic ARP inspection : Yes
- DoS protection : Yes
- DoS attacks prevention : Yes
- Network storm protection, DoS : Yes
- Quality of Service (QoS) : *
- Port-based rate limiting : Yes ingress and egress
- Port-based QoS : Yes
- Support for IPv6 fields : Yes
- DiffServ QoS : Yes ingress
- IEEE 802.1p COS : Yes
- Destination MAC and IP : Yes
- IPv4 and v6 DSCP : Yes
- TCP/UDP-based : Yes
- Weighted Round Robin (WRR) : Yes
- Strict priority queue technology : Yes
- IEEE Network Protocols : *
- Protocols : • IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3af PoE • IEEE 802.3at PoE+ • IEEE 802.3az Energy Efficient Ethernet (EEE) • IEEE 802.3ad Trunking (LACP) • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
- Protocols 2 : • IEEE 802.3x Full-Duplex Flow Control • IEEE 802.1Q VLAN Tagging • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED) • IEEE 802.1p Class of Service • IEEE 802.1D Spanning Tree (STP) • IEEE 802.1s Multiple Spanning Tree (MSTP) • IEEE 802.1w Rapid Spanning T
- Management, Monitoring & Troubleshooting : *
- Password management : Yes
- Access control via RADIUS and TACACS+ : Yes
- IPv6 management : Yes
- SNMP v1/v2c/v3 : Yes
- Port mirroring : Yes ingress and egress
- Many-to-one port mirroring : 6
- Cable test utility : Yes
- TLS/HTTPS Web-based access (version) : Yes (v1.2)
- File transfers (uploads, downloads) : TFTP / HTTP
- HTTP upload/download (firmware) : Yes
- Syslog (RFC 3164) : Yes
- LEDs : Yes
- Per port : Speed, Link, Activity; PoE in different mode
- Per device : Power
- Physical Specifications : *
- Dimensions (Width * Depth * Height) : 150 x 130 x 48 mm (5.91 x 5.12 x 1.89 in)
- Weight : 0.75 kg (1.64 lb)
- Shell protection : P40 high-strength aluminum case
- Power Requirements : DC 12~48V, redundant power with reverse polarity protection
- Max power : 7W
- Iddle power consumption : 5W
- Energy Efficient Ethernet (EEE) : Yes (deactivated by default)
- Fan : Fanless
- Environmental Specifications : *
- Operating Temperature : -40° to 85°C (-40° to 185°F)
- Operating Humidity : 95% maximum relative humidity (RH), non-condensing
- Operating Altitude : 10,000 ft (3,000 m) maximum
- Storage Temperature : -40° to 85°C (-40° to 185°F)
- Storage Humidity (relative) : 95% maximum relative humidity, non-condensing
- Storage Altitude : 10,000 ft (3,000 m) maximum
- Executive Standard & Protection : *
- Lightning Protection : *
- IEC61000-4-3 (RS) : 10V/m (80~1000MHz)
- FCC Part 15/CISPR22 (EN55022) : Class B
- IEC61000-6-2 : Common Industrial Standard
- IEC61000-4-9 (Pulsed magnet field) : 1000A/m
- IEC61000-4-10 (Damped oscillation) : 30A/m, 1MHz
- IEC61000-4-12/18 (Shockwave) : CM 2.5kV, DM 1kV
- IEC61000-4-4(EFT) : Power cable:±4kV, Data cable: ±2kV
- IEC61000-4-16(Common-mode transmission) : 30V, 300V, 1s
- IEC61000-4-2 (ESD) : ±8kV contact discharge, ±15kV air discharge
- IEC61000-4-6 (Radio frequency transmission) : 10V(150kHz~80MHz)
- IEC61000-4-8 : 100A/m, 1000A/m, 1s-3s
- IEC61000-4-5 (Surge): Power cable : CM±4kV/ DM±2kV, Data cable: ±4kV
- Mechanical Properties : *
- IEC60068-2-6 : Anti Vibration
- IEC60068-2-32 : Free Fall
- IEC60068-2-27 : Anti Shock
- Electromagnetic Emissions and Immunity : *
- Certifications : CE mark, commercial; FCC Part 15 Class A, VCCI Class A; Class A EN 55022 (CISPR 22) Class A; Class A C-Tick; EN 55024; CCC; 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A; ANSI C63.4:2014; IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013
- Safety : *
- Safety Certifications : CB mark, commercial; CSA certified (CSA 22.2 #950); UL listed (UL 1950)/cUL IEC 950/EN 60950; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005 ;(ed.2)+A1:2009+A2:2013; AN/NZS 60950.1:2015; CCC (China Compulsory Certificate)
- Warranty and Support : *
- Hardware Limited Warranty : Limited Lifetime*
- Technical Support via Phone and Email* : Limited Lifetime*
- 24x7 Online Chat Technical Support : Limited Lifetime*
- Package Contents : *
- All models : Smart Industrial Switch ; Brackets and screws for DIN-Rail mounting, which are already installed in the switch; Rubber protection caps, which are already installed in the SFP sockets Installation guide
- Business Type : Industrial
- Bandridth : 1G
- More Filters : L2+ Managed
Downloads
- Managed Gigabit 8 port solar Industrial PoE Swtich with 2 Gigabit SFP Datasheet (IES7511-8PGE2GF-SOL)
Related Products
- 
 IES7511-4PGE2GF-BOS4 Ports Booster PoE Switch IES7511-4PGE2GF-BOS4 Ports Booster PoE Switch
- 
 IES7511-8PGE2GE4GF-BOS8 Port Booster PoE Switch With 2 Gigabit RJ45 And 4 Gigabit SFP Uplink IES7511-8PGE2GE4GF-BOS8 Port Booster PoE Switch With 2 Gigabit RJ45 And 4 Gigabit SFP Uplink
- 
 IES7231C-4PGE1GE-M124 Ports Gigabit M12 PoE Switch With 1 Gigabit Uplink IES7231C-4PGE1GE-M124 Ports Gigabit M12 PoE Switch With 1 Gigabit Uplink
- 
 IES7231C-8PGE-M128 Ports Gigabit M12 PoE Switch IES7231C-8PGE-M128 Ports Gigabit M12 PoE Switch
 English
						English																																																												 
											 
											 
											 
											 
											 
											 
							 
										 
										 
										 
										 
										
 E-Mail Us
E-Mail Us Call Us
Call Us Address
Address 
						




 IPv6 network supported
IPv6 network supported