PoE VoIP phones

  You would need a PoE splitter instead of a PoE-enabled device in situations where your existing devices do not support Power over Ethernet (PoE) but still require both power and data connections. A PoE splitter allows you to integrate non-PoE devices into a PoE-powered network, providing several advantages in terms of cost, flexibility, and deployment efficiency.   Key Reasons to Use a PoE Splitter Instead of a PoE-Enabled Device 1. Using Non-PoE Devices in a PoE Network --- If you already have non-PoE devices (e.g., IP cameras, access points, Raspberry Pi, or media converters) and you do not want to replace them with PoE-compatible versions, a PoE splitter enables you to power them via Ethernet. --- Instead of buying new PoE-enabled devices, you can continue using your existing equipment while benefiting from PoE infrastructure.   2. Cost-Effectiveness --- PoE-enabled devices (such as PoE IP cameras, PoE VoIP phones, or PoE access points) are often more expensive than their non-PoE counterparts. --- A PoE splitter is a lower-cost alternative to upgrading all your devices, making it a budget-friendly solution for integrating non-PoE devices into a PoE-powered setup.   3. Easier Installation in Locations Without Power Outlets --- Many network devices (e.g., surveillance cameras, access points, digital signage) are often installed in hard-to-reach places like ceilings, outdoor poles, or remote areas. --- Running a separate power cable to these locations can be difficult and expensive. --- A PoE splitter allows you to deliver both power and data over a single Ethernet cable, eliminating the need for nearby electrical outlets.   4. Reducing Cable Clutter and Power Adapters Without a PoE splitter, non-PoE devices need both: 1. An Ethernet cable for data. 2. A separate power adapter plugged into a power outlet. A PoE splitter removes the need for a separate power adapter, reducing cable clutter and simplifying installation, which is especially useful in structured cabling environments.   5. Compatibility with Low-Voltage Devices --- Some small devices, such as Raspberry Pi, sensors, or embedded controllers, require specific DC voltage levels (e.g., 5V, 9V, or 12V). --- A PoE splitter can convert the standard PoE voltage (48V) into a lower DC voltage, making it suitable for devices that cannot handle direct PoE input.   6. No Need to Upgrade Your Network Infrastructure --- If you have an existing non-PoE switch and need to power PoE devices, you would normally need to replace the switch with a PoE switch. --- Alternatively, you can use a PoE injector + PoE splitter combination to provide power to specific non-PoE devices without upgrading your entire network infrastructure.   7. Greater Deployment Flexibility --- Some specialized devices do not have PoE-enabled versions available (e.g., certain IoT devices, custom-built embedded systems, or proprietary network equipment). --- A PoE splitter allows any Ethernet-powered device to be used in a PoE network, making your deployment more versatile.     When to Choose a PoE Splitter vs. a PoE-Enabled Device Scenario Use a PoE Splitter Use a PoE-Enabled Device You already own non-PoE devices and want to integrate them into a PoE network. ✅ ❌ You want to reduce costs without replacing existing devices. ✅ ❌ Your device requires a specific DC voltage (e.g., 5V, 9V, 12V). ✅ ❌ Your device is installed in a location without a power outlet. ✅ ✅ You are building a new network and want the simplest PoE solution. ❌ ✅ Your devices are already PoE-compatible. ❌ ✅     Conclusion A PoE splitter is the best choice when you need to power non-PoE devices in a PoE network, reduce installation costs, eliminate additional power adapters, and simplify deployment in locations without easy access to power outlets. It is a cost-effective alternative to buying PoE-enabled devices and provides greater flexibility for using a mix of PoE and non-PoE equipment.